Pac 2821 Series Cnc Router

Pac 2821 series machines are especially preferred by furniture mass producers.

Due to its optimal dimensions, this machine can work on a 280cm x 210cm part without disruption.

The part is fixed to the working table by vacuum.

The optional positioning pistons are available, according to the customer request.

This machine has individual motors on each of the support arms, on the left and on the right, to provide serial movement and operation.

The movement takes place on the helical racks.

Machine body is grinded and stress relieved so that it would be more resistant to external factors, such as load tension, temperature drops, etc.

The standard spindle motors are 7.5 kW 24,000 rpm.

Based on the customer request, 9-11 kW exchangeable tool spindle motors could be used.

In addition, 8 linear tool change unit could be added.

Net Working Space	X: 2800mm Y: 2100 mm Z: 150-250mm
Body Construction	Milled steel body
Guideway System	25 mm Linear guideway and carrier
Drive System	X: M2 Helical rack Y: M2 Helical rack Z: 2505 Ball screws
Working Table
Spindle Motor	7.5 kW 24.000 rpm 9-11 kW exchangeable tool motors (Optional)
Axis Motors	Servo motors Stepper motors (Optional)
Control System	DSP CNC control unit Delta CNC controller (Optional)
Other Feautres	Central greasing system Tool cooling Kiosk type remote control panel
Tool Change	Sequential tool change (Optional)
Vacuum Table	200mm Compact
Vacuum Pump	305 m³ Greased vacuum pump (Optional)